Grace Construction Products
Select a country
 
Search:

Select a Product Line
Air and Vapour Barriers
Architectural Concrete, PieriĀ®
Building Green with Grace
Cement Additives
Concrete Admixtures
Flexible Flashings
International Project Solutions
Masonry Products
Passive Fire Protection
Pipeline Protection
Roofing Underlayments
Specialty Vermiculite
Structural Fibres
Structural Waterproofing
CAD Details
Contact Information
Further Links
Interactive Product Selector
MSDSs
Structural Waterproofing - United Kingdom


Post-applied Waterproof Membranes

BETEC® 350
BETEC®350 is a single component cementitious compound which is polymer modified and fibre reinforced. It is a rapid setting, high strength, waterproof compound used to seal tieholes that are created by formwork tie bars.
 |  DATA SHEET  | 


BETEC® Flex
It comprises a liquid polymer A component and a special cement based powder B component. The two components are mixed together with a slow speed drill and paddle to form a smooth slurry. The slurry is applied by trowel or brush, in two coats, to horizontal and vertical surfaces and dries to form a hard but flexible waterproof cementitious coating.
 |  DATA SHEET  |  MSDS  |  MSDS 2  |  CAD DETAILS  | 


BETEC® NSM
BETEC® NSM mortars are a range of technically advanced, single component, cementitious repair mortars that are fibre-reinforced and polymer-modified The incorporation of plastic fibres minimises the risk of shrinkage cracking and the polymers ensure density and durability in the hardened mortar.
 |  DATA SHEET  |  MSDS  |  MSDS 2  |  CAD DETAILS  | 


BETEC® Plug
It is a single-component quick-setting, waterproofing plugging compound supplied in 5 kg plastic buckets. When mixed with water, a plastic, highly workable, mortar is formed which can be applied by hand to plug leaks in concrete and masonry structures.
 |  DATA SHEET  |  MSDS  |  MSDS 2  |  CAD DETAILS  | 


BETEC® Seal
This is a ready to use powder premix comprising cement, selected particle size quartz, synthetic resins and special additives. Betec Seal is mixed with water using a slow speed drill and paddle to form a smooth slurry. The slurry is applied by brush or trowel, in two or three coats, to horizontal and vertical surfaces and dries to form a hard, durable, waterproof cementitious coating.
 |  DATA SHEET  |  CAD DETAILS  | 


Bituthene® 2000
Bituthene 2000 is a pre-formed self-adhesive rubber bitumen/HDPE damp proof and radon gas barrier to comply with Building Regulations 1991 Clause C2.



Ancillary Products: Bituthene® LM, Bituthene® Mastic

 |  BBA CERTIFICATE  |  DATA SHEET  |  MSDS  | 


Bituthene® 3000
Self-adhesive rubber/bitumen polyethylene waterproof membrane for basements and substructures.
 |  BBA CERTIFICATE  |  DATA SHEET  |  MSDS  | 


Bituthene® 3000 HC
One component, flexible polyurethane injection grout for sealing water leaks in construction joints.
 |  DATA SHEET  | 


Bituthene® 4000/4000S
Bituthene® 4000/ 4000S is a flexible waterproof membrane combining a high performance cross laminated, HDPE carrier film with a unique super sticky self-adhesive rubber bitumen compound.
 |  BBA CERTIFICATE  |  DATA SHEET  |  MSDS  | 


Bituthene® 8000/8000S
Bituthene® 8000/ 8000S combines the proven Bituthene adhesive technology with a unique, grey coloured carrier film to provide superior performance and easier installation.
Bituthene 8000/ 8000S is extremely tough but any accidental damage which would otherwise be missed, is made visible by the black compound showing through the light grey film.

 |  BBA CERTIFICATE  |  DATA SHEET  |  MSDS  |  CAD DETAILS  | 


Bituthene® GP
Self-adhesive rubber bitumen/HDPE waterpoof membrane for low risk applications.
The product is for low-risk applications only and is capable of resisting a hydrostatic head up to 1m.

 |  DATA SHEET  | 


Bituthene® MRX
Bituthene MRX is a methane and radon gas resistant grade of Bituthene specifically designed to resist the passage of methane gas in addition to acting as a waterproof membrane protecting building foundations.
 |  DATA SHEET  |  MSDS  | 


Bituthene® Tapes
Alu-BitutapeTM
A self-adhesive UV resistant flashing made from an aluminium finished polyethylene film with the proven Bituthene® rubber bitumen adhesive to provide a tough, flexible waterproofing strip for exposed locations.
Standard (Std) BitutapeTM
A general-purpose polyethylene/rubber bitumen banding strip for use in covered, non-exposed applications and available in a range of widths. It is a flexible polyethylene strip coated on both sides with Bituthene® rubber bitumen adhesive to provide excellent adhesion to most building substrates.
Ancillary Products: Primer B2

 |  DATA SHEET  |  MSDS  | 


Grace Primers
Primers for use with the Bituthene® range of cold applied, self adhesive waterproof membranes.
 |  DATA SHEET  | 


Grace® Gas Membrane 400
Grace® Gas Membrane 400 is a high performance, reinforced polyethylene membrane incorporating a gas resistant aluminium foil. The multi-layered laminate structure gives good strength, flexibility and installation properties.
 |  DATA SHEET  | 


Preprufe® 800PA
Preprufe® 800PA is a cold-applied, self-adhesive waterproofing membrane, composed of a reinforced cross laminated HDPE film, and a synthetic non-bituminous adhesive. Preprufe 800PA incorporates the Preprufe Advanced Bond Technology™.
 |  DATA SHEET  |